Rearset Powdercoating Question

Okay, bike is all done. Went down to the garage early this morning to install all the parts. I started with the easy stuff first. The rear passenger brackets went on easy.

IMG_20170408_093814_zpstsyhygjk.jpg


IMG_20170408_095504_zpss2pscvg2.jpg



Next I pressed in the bushings using my 6" bench vise.

IMG_20170408_102634_zpsnd5h59gl.jpg


IMG_20170408_103604_zps3sadeyda.jpg


IMG_20170408_111314_zpsr4fz47bj.jpg



I installed the brake side first.

IMG_20170408_111337_zpsnujrcbjp.jpg


IMG_20170408_122713_zpsxljbpkq0.jpg



Clutch side went on next.

IMG_20170408_122724_zpsr5hcmo2z.jpg


Lastly I installed the carbon fiber heel plates. I had to dremel the top hole on the brake side just a touch as it was off a bit. After that they installed without a problem.

IMG_20170408_123425_zpsgaqqjhan.jpg


IMG_20170408_141740_zpsbsxnxtdx.jpg


When all was done I went for a nice ride. First one of the season and it felt great!

IMG_20170408_141627_zpsv0gk01nw.jpg


Thanks to everyone that has followed the thread and contributed helpful tips. Now it's time to start some "Ride Threads"!
 
Thanks Pete. I do have some Hyper Pro fork springs to install, but after that there's nothing more I'd like to do other than ride the heck out of it. Last year's 3,000 mile season was unacceptable! This season, hopefully less rain and more riding!
 
You must log in or register to reply here.
Back
Top