OldBiker
Wizard
I'm about 190 pounds and set my 08 R1 shock at the stock settings for fast and slow compression and two clicks softer on the rebound damping. Good control and the expansion strips don't chatter my teeth anymore.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I was going to dive into it today, but should probably do more research on these forums beforehand. There is a particularly good thread on the other forum about the "Euro conversion," so I'll look at that again.I just want to do it with minimal cutting & splicing of wires, though I'm sure the harness on the S is a big, gangly, and messy affair that may not be that easy to hide once the plastics are off.How much of a hurry are for the conversion? I made up a custom harness to plug the S wiring into the N but I'm over in Oz. Second thoughts, Our indicators are wired differently.