How To: Roth AIS Block Off Plates Installation

[maddog1982]

Did this on saturday using a 5mm allen key, my god what a PITA! Used Ivans plates.

Only thing I noticed was the bike idled lower after I had installed these? Not sure how this is even possible? It has always idled low (only had her since middle of Feb 14) but it was now idling at 500rpm.. Easily cured with a few turns of the screw. Any ideas why this would happen? Only mods are a Micron slip-on

Wondering I have pinched a fuel line now, the bike did seem not as keen as before thinking about it.

 

[Oldschool]

Wondering I have pinched a fuel line now, the bike did seem not as keen as before thinking about it.

That is entirely possible as it is easy to do when raising the tank. It is an easy fix with rubber fuel line from the Auto parts store. I would do it anyway as the rubber line is far more robust and can't be kinked.

 

[maddog1982]

That is entirely possible as it is easy to do when raising the tank. It is an easy fix with rubber fuel line from the Auto parts store. I would do it anyway as the rubber line is far more robust and can't be kinked.

Would this do the trick? I was going to order 6mm. Is there just one line to replace?

FUEL PIPE Braided Hose RUBBER Engine Unleaded Petrol Diesel Oil Line 1 Metre 1m | eBay

 

[Oldschool]

Would this do the trick? I was going to order 6mm. Is there just one line to replace?

FUEL PIPE Braided Hose RUBBER Engine Unleaded Petrol Diesel Oil Line 1 Metre 1m | eBay

Yes and Yes.

 

[maddog1982]

Yes and Yes.

Well fitted my new pipe today and the bike is night and day different! So much more powerful down the bottom end! Sounds slightly deeper to