well up to 34000 miles now and still love her...She'll be 4 in July and so I'm thinking of getting a new bike.
To be honest, if I didn't have a silly rule in my head to say I have to try a different make/model bikes i would probably get another one (although I think I would get the faired...
Hi Lewis...Welcome to the site...Cracking bikes the FZ1...Gearing change is one of the first things I did to give a bit more low down as they are geared fairly tall I found.
get yourself a Scala too...Oh I already said that :-)
When you changed your shims how did you tension the cam chain?
When cranked clockwise the chain seems tensioned but when cranked anti-clockwise the chain went slack.
Is this normal?
Is it true the cam chain tensioner only works properly when it has oil pressure on it?
Thanks for the reply..
Does anyone know what is the correct way to re-install the camchain tensioner and get it to tension the chain without the engine running on a FZ1? I think it uses oil pressure to tension, but want it fully tensioned before starting the engine!
Cheers
Cheers for the reply...So we are going ahead with the shim replacement as might as well whilst the cover is off and the bike is in pieces.
Worked out the relevant clearance calculations and decided what shim sizes we needed to get so popped to the dealer. Strange...even though the bike was...
Guys,
Can someone help me please?
We are just checking the value clearances on my 2010 FZ1-n and 7 out of the 8 exhaust valve clearances are out of spec. The clearances are:-
3 x 0.15mm
1 x 0.16mm
2 x 0.18mm
1 x 0.20mm
The sheet states 0.21mm to 0.25mm so we potentially are...
Hi Guys,
Would someone mind guiding me in the direction of where I can find the relevant points undertaken in the 24000 mile service?
Is there an official list of jobs published somewhere for the 24000 mile service on a FZ1-n (2010)?
Cheers
Neil
if I apply copaslip to the rear axle thread should I ease off the torque settings when doing up the rear axle nut?
Someone told me that if I keep the same torque setting when doing up the axle nut after lubrication then I risk increasing the clamp rate and possibly causing some damage.
i...
I use the Ventura Luggage rack system and like it....
I have been in a couple of bad downpours and it has held up well although I do use inner dry bags as well.
Hi Guys,
Can anyone recommend any Brake and Clutch levers?
It would be really helpful if anyone has any pictures as well?
I want to get some black ones to replace the OEM silver ones but I'm considering stubby ones but not sure how they are going to look on the FZ1?
Cheers
Neil
I have covered 18500 miles now and I love her more every time I ride her.. People have started saying when and what my next bike will be here...I'm still in love with this one so will be keeping hold of her for a while longer.
The best thing I did was changing the gearing -1 front (16) and...
The speedo was 10% out from GPS speed and then I changed the front/rear sprockets and chain with a -1/+1 format which put the speedo out even further so thought I would install the Speedo Healer.
It was easy enough to do and so now at least my speedo matches my GPS speed.
Another job...
Finished changing the front/rear sprockets and chain with a -1/+1 format last night and took her out for her first spin today.
I love it....Feels brilliant. Was a little concerned I would be wheel spinning everywhere but not the case at all. It noticeably gives you more torque but not too...