What did you do to your Non-FZ1 motorcycle today.

[heresmymind]

I pin-striped my bike to a "TRON" style theme...

-B

 

[Hellgate]

Installed my "Mandlebar" stickers.

 

[Lonney]

My Chinese jack blew out and the big girl fell off the sidestand and did not fall !!
GOOD GIRL !!


Sent from my iPhone using Tapatalk

 

[Dustin]

Brutal! Hope there's no damage

 

[Hellgate]

Which stand was it?

 

[Lonney]

Which stand was it?

this one


Sent from my iPhone using Tapatalk

 

[Lonney]

Well i seen Doug ( one size ) tip his Hondaponamas over so i tried it thanks Doug !!

http://images.tapatalk-cdn.com/15/07/01/2054fe0258c59e65c7117756c1b94223.jpg[/IMG
Ha Ha im done for the night no damage just some broken fairing rivits
The cycle gods were with me today !!


Sent from my iPhone using Tapatalk

 

[Lonney]

I hit 5.000 miles on the super ten so I put a new filter and Amsoil and I removed cleaned and lubed the shifter assembly .

 

[n.e.mich]

Swapped out the 44t for a 42t, lost 6-700 rpm at highway speed. Perfect for the longer rides...

 

[Hail]

Purdy that is!

 

[n.e.mich]

Replaced the factory steering head/stem ball bearings with tapered roller bearings last night. That was 2.5 hours of no fun. lolol

 

[n.e.mich]

Gave it a nice bath today, had grease and hand prints all over it.



Ahhhhhh

 

[Lonney]

Spent the night in lake Ariel PA ( its up near Scanton PA ) it only took me two hours to get home !! 160 miles




Sent from my iPhone using Tapatalk

 

[Lonney]

Rode the supen ten for four hours and 140 miles for a total of six hours and 300 miles today.
I started off 6:00 am 52* f Now its 90* f i was freezing this morning in mesh gear !!


Sent from my iPhone using Tapatalk

 

[heresmymind]

spent 10 minutes and installed AIS block offs on the fz8

-B

weight savings: 1/2lb ~ 23.8hp

 

[n.e.mich]

Finally repainted (epoxy) the garage floor!

 

[Oldschool]

Finally repainted (epoxy) the garage floor!

Ooh, purdy!

If my garage floor looked that nice, I might never go in the house.

 

[n.e.mich]

I do spend a lot of time out there!

 

[Lonney]

Finally repainted (epoxy) the garage floor!

It looks great what did you use.? Did you have to etch the concrete)


Sent from my iPhone using Tapatalk

 

[n.e.mich]

These are the cleaners/paint/sealant I used:

I used the Rustoleum 2 part epoxy paint kit last time and really wasn't impressed with the short time it lasted. This way was a little cheaper but we'll see if it holds up. Ended up using 2 1/2 gallons of paint (2 coats) and 2 gallons of sealer (2 coats). I bought the cleaner and paint at Home Depot and had to buy the sealer at Lowes. Home Depot and Menards only carry the Rustoleum brand of gloss sealer which is much more expensive.