Rooster
Member
Hi guys and gals,
i purchased a really clean 2006 FZ1-N with 31,750km on the odo.
Ive already changed the rotor for the updated oem version-original was in VGC......Frame welds look clean and structurally sound.
Came with a full tank of juice that had been sitting for three weeks prior to me purchasing her.
PCIII.
Micron GP megaphone slip-on
And it looks like the exup has been disconnected...(cables tucked away and tied to swingarm).
I cant remember if any other mods were mentioned, ive got to contact the previous owner again.
She's been dynoed and pulled 152hp (not too shabby).
Cold start rpm is approx' 1500...running temp idle approx' 1100rpm (might need a tad more 100-150rpm?).
Running temp idle is a little lumpy but its a consistent idle pattern and doesnt bounce up and down randomly or anything like that.
She winds out smoothly and pulls strongly through the rev range (5500 and hang on : ) ALTHOUGH...i did get a slight miss once, when i hit the throttle quickly (it was like she did a little spit and then continued to pull).
Decel is a beautiful, deep, broken gurgle with the occassional blip thrown in here and there...i say blip as she doesnt really pop as such (its a cool sound).
I understand the idle issue is due to modding the bike. Mine's not THAT bad (sounds like a mildly worked/cammed motor ; )
Does my bike sound healthy to you and do you have any suggestions or comments about the above.
Thanks guys, i really appreciate your comments...Cheers
i purchased a really clean 2006 FZ1-N with 31,750km on the odo.
Ive already changed the rotor for the updated oem version-original was in VGC......Frame welds look clean and structurally sound.
Came with a full tank of juice that had been sitting for three weeks prior to me purchasing her.
PCIII.
Micron GP megaphone slip-on
And it looks like the exup has been disconnected...(cables tucked away and tied to swingarm).
I cant remember if any other mods were mentioned, ive got to contact the previous owner again.
She's been dynoed and pulled 152hp (not too shabby).
Cold start rpm is approx' 1500...running temp idle approx' 1100rpm (might need a tad more 100-150rpm?).
Running temp idle is a little lumpy but its a consistent idle pattern and doesnt bounce up and down randomly or anything like that.
She winds out smoothly and pulls strongly through the rev range (5500 and hang on : ) ALTHOUGH...i did get a slight miss once, when i hit the throttle quickly (it was like she did a little spit and then continued to pull).
Decel is a beautiful, deep, broken gurgle with the occassional blip thrown in here and there...i say blip as she doesnt really pop as such (its a cool sound).
I understand the idle issue is due to modding the bike. Mine's not THAT bad (sounds like a mildly worked/cammed motor ; )
Does my bike sound healthy to you and do you have any suggestions or comments about the above.
Thanks guys, i really appreciate your comments...Cheers