T67
Member
Merry Christmas all,
i'm checking the valves on my 08. the shop manual gives directions, which i understand, BUT:
i just want to confirm that the lobes on the #2 and #3 cylinders should be pointing toward each other when checking those clearances. i find that the lobes for #1 and #4 face away from each other.
im asking because its such a pain to get the feeler gauge between the lobe and bucket when they face each other. i havent been able to get a decent reading yet. just want to make sure i'm doing it right. i've checked around but havent seen anythign that answers this question.
i'll go about doing some of the other things on the list in the mean time.
thanks in advance for the help!
regards,
tim
i'm checking the valves on my 08. the shop manual gives directions, which i understand, BUT:
i just want to confirm that the lobes on the #2 and #3 cylinders should be pointing toward each other when checking those clearances. i find that the lobes for #1 and #4 face away from each other.
im asking because its such a pain to get the feeler gauge between the lobe and bucket when they face each other. i havent been able to get a decent reading yet. just want to make sure i'm doing it right. i've checked around but havent seen anythign that answers this question.
i'll go about doing some of the other things on the list in the mean time.
thanks in advance for the help!
regards,
tim