Phil_RC_1
Well-Known Member
To Anyone using the Healtech Speedohealer, Are you having any surging issues with it? If not, Where did you mount it and where did you route your wiring? Do you have the Top Speed recall button wired in? Pics would be great too
I am experiencing a fairly pronounced surging in fourth gear. I've been through all the surging threads here and on the other sight, tried the typical "surging" fixes. Still no go. I disconnect the SH and the problem goes away. Healtech replaced the unit and the wiring harness under warranty, got the new one in,,,same issue. So, by process of elimination, it must be the position that I have it mounted or my wiring route, or my particular bike just don't like it .
Any ideas?
Phil
BTW: The manual does say not to route wiring near the ECU or ECU wire harness. From that statement in themanual, I assume that either the SH can be susceptible to interference or it can cause interference. Not sure which.
I am experiencing a fairly pronounced surging in fourth gear. I've been through all the surging threads here and on the other sight, tried the typical "surging" fixes. Still no go. I disconnect the SH and the problem goes away. Healtech replaced the unit and the wiring harness under warranty, got the new one in,,,same issue. So, by process of elimination, it must be the position that I have it mounted or my wiring route, or my particular bike just don't like it .
Any ideas?
Phil
BTW: The manual does say not to route wiring near the ECU or ECU wire harness. From that statement in themanual, I assume that either the SH can be susceptible to interference or it can cause interference. Not sure which.