thorspapa
Member
I have a 2012 FZ1, and after doing a search through the SEARCH feature (before anyone tells me to do so ) I've not found this information:
I'm trying to purchase a front head stand, like a Pit Bull, etc. It uses a pin that goes into the head or triple trees to lift the front end and allow the wheel, forks, etc to be removed.
What I'm trying to find out is if anyone that has used or used one on the newer FZ1, had to move the horn and the front brakes line connector, since they both block the hole where the pin supposedly goes.
Also this hole (I assume it is the correct hole) is plugged by a nice, beefy rubber plug. It can be removed after the aforementioned items are out of the way, but it makes for a lengthy process to do all this just to put bike on stand.
A stand that raises the bike at the front forks works fine, except if you have to remove the forks..........
Anyone has any experience with this type of stand on the GEN II FZ1?
Any help is appreciated.
I'm trying to purchase a front head stand, like a Pit Bull, etc. It uses a pin that goes into the head or triple trees to lift the front end and allow the wheel, forks, etc to be removed.
What I'm trying to find out is if anyone that has used or used one on the newer FZ1, had to move the horn and the front brakes line connector, since they both block the hole where the pin supposedly goes.
Also this hole (I assume it is the correct hole) is plugged by a nice, beefy rubber plug. It can be removed after the aforementioned items are out of the way, but it makes for a lengthy process to do all this just to put bike on stand.
A stand that raises the bike at the front forks works fine, except if you have to remove the forks..........
Anyone has any experience with this type of stand on the GEN II FZ1?
Any help is appreciated.