Bluey
Well-Known Member
It's time to replace the coolant in my FZ1S. The manual is not very specific on the type to use. It just says to use an Ethylene Glycol with corrosion inhibitors for aluminium engines. On a previous post it was recommended not to use car coolant but a quick check in the local car part shop shows most claim to be compatible with all engines including motorcycles. I might just use the Yamalube product but any recommendations would be welcome.
Also some research shows that the coolant drain plug is susceptible to breakage during removal/installation. Any suggestions to work around this would also be appreciated. Thanks.
Also some research shows that the coolant drain plug is susceptible to breakage during removal/installation. Any suggestions to work around this would also be appreciated. Thanks.