Similar issue on my 08, adjust the lever so there is about a nickle thick space in slack of the lever. some driving with fresh oil and proper adjustment should correct the clutch, the glaze will resolve on its own. If you find the clutch needs to be replaced though, buy an OEM clutch kit with...
I'm not quite sure about that yet, I have to meet with the guy next week and we will draw them up and start cutting. Then we will have a handle on what we think the price point will be. And he used to sell lowering links... Not sure if they came with bearings or not. I remember when we made...
This is a stock setup here... as you can see by the arrows, if we put the R1 shock in which will sit a bit lower and then lengthen the link, the shock will hit as the triangle will rotate. So I made a link that was a litter thicker that I could cut out a recess for where the shock was hitting...
The R1 shock will raise the rear end about 1/2 inches from stock according to what I read. So what I did was modify the link in such a way to allow it to clear the lower shock bolt as well as the center stand. The link will be a bit longer than the stock one which will yield a 1 inch seat height...
So I've been made aware that the r1 adapter with shock will only work with the stock dog bone. I have just mounted the shock with satans adapter and it was a bit tall for me. So what I did was modify my existing 1" lowering link from cycleoneoff to make it fit and then use that as a template to...
So i've been searching around and haven't found any concrete answers...
When I grab the front brake, I hear a clunk come from the front front end. It only happens on initial pull. I read it could be due to the caliper pin or possible the floating joints on the rotor... I wanted to know if...
So my brakes are not as strong as I want them to be...
I put some new HH pads in which made a bit of a difference, but I still have some softness in the braking.
I see the threads about the R1 calipers and M/C but I am not going to put on an R1 front end so that's out of the question.
So...