PeteRyland
New Member
Hi
Have had LED indicators on my 2006 FZ1N for a 5 years now with an after market flash relay. The rears recently started to lose some of the LEDs, so i popped the lense to investigate. A little corrosion and some suspected dry joints in there.
Scraped a little of the fur away with no problems, then had an idea to swap left and right, to check that the bullet connectors were ok. both flashed as before, so connectors were fine. I then reconnected them the right way around, switched the ignition back on to check them and they don't work!
Checked the 10 amp fuse and even resorted to replacing the relay and indicators with the originals, but with no joy.
can anyone please post a copy of the turn signal wiring diagram, so that i can trace the system through, or offer any other suggestion as to what the problem is?
cheers
Pete
Have had LED indicators on my 2006 FZ1N for a 5 years now with an after market flash relay. The rears recently started to lose some of the LEDs, so i popped the lense to investigate. A little corrosion and some suspected dry joints in there.
Scraped a little of the fur away with no problems, then had an idea to swap left and right, to check that the bullet connectors were ok. both flashed as before, so connectors were fine. I then reconnected them the right way around, switched the ignition back on to check them and they don't work!
Checked the 10 amp fuse and even resorted to replacing the relay and indicators with the originals, but with no joy.
can anyone please post a copy of the turn signal wiring diagram, so that i can trace the system through, or offer any other suggestion as to what the problem is?
cheers
Pete