Tray to fit removed exup area

It's easy to make your own. I would cut up an old shoe box for easy to work with materials and once I was satisfied with the fit, I would make it out of metal.
 
NJFZ1 said:
You can just probably make one yourself with some thin aluminum sheet if all else fails.
Click to expand...

I did that :)
Not the best looking, but who'll se it? :)

DSC_0044.JPG

First some cardboard

Then some aluminum
DSC_0046.JPG


DSC_0927.JPG
 
If you remove the servo, you will get a fault. You can purchase a servo eliminator or create one yourself. The servo eliminator I have was purchased from a forum member here or FZ1OA.
 
Looks like we all have great ideas. If you notice a little white piece of plastic just below the mounting bolts. That is from a ziptie that mounts by pushing that part through a 1/4 hole. On the backside I ziptied the EXUP elim. relay to it.
 
Blanchy said:
Anyone know where to get a tray to fit in the area where the exup motor fits? I've seen them somewhere but can't find it now.
Click to expand...

I have a very nice machined bracket I bought last year and do not plan to install, $50 shipped. Perfect for mounting PC 3/5.

IMG_6316-M.jpg

IMG_6322-M.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top