tacpro45
Member
Don't mean to revive an old thread, but is there a trick to getting the old engine mount bolts out to put the new ones in for the sliders? At a stopping point trying to figure this out...
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Sliders for a '02 FZ1?
- Thread starter LB's FZ1
- Start date
Premiers070911
Well-Known Member
i installed mine last night.
the only thing i struggled with was the left side. just turn the bolt as if it was still threaded to a nut, and if its getting caught on the metal sleeve at the nut end ie its spinning with the bolt, push the bolt back in then tap the sleeve gently from the other side with a hammer and long screwdriver.
dont forget to only do one at a time.
the only thing i struggled with was the left side. just turn the bolt as if it was still threaded to a nut, and if its getting caught on the metal sleeve at the nut end ie its spinning with the bolt, push the bolt back in then tap the sleeve gently from the other side with a hammer and long screwdriver.
dont forget to only do one at a time.