iwantone
Member
03 bumble. I replaced my rear pads about 1000 or so miles ago. I was riding down a mountain road the other day and my rear brake lever started getting a little spongey. Didn't think anything of it. I get a few miles farther and I lose all pressure in my rear brakes. I pushed on the lever as far down as it would let me, I then started hearing some grinding. I stop at the end of the road, get off my bike to check if any fluid is leaking or if the reservoir is low. Both seem to be fine. I also check my caliper and out also looks fine. I figure I can get home with just the front brakes if I drive slow enough. Out of habit, I press on the reat lever and all pressure is restored. I even tested the stopping power and it all seems to be back to normal.
My question is, what would cause temporary loss of my rear brakes?
I typed this on my phone, so please excuse the typos
Sent from my SAMSUNG-SGH-I317 using Tapatalk
My question is, what would cause temporary loss of my rear brakes?
I typed this on my phone, so please excuse the typos
Sent from my SAMSUNG-SGH-I317 using Tapatalk