If u have a hyperpro stabilizer, read on.

silentcropduster

silentcropduster

Well-Known Member
Visit site
Anybody have install directions? Checked out hyperpro's website, can't find squat.

I know how to install it but had a few ?'s...like bolt torque on the lower clamp?

Also when putting back together the fairing: the top piece requires me to remove the oem rubber grommet so I have clearance 2 put the new bolt in, problem is when I tighten it up and out all back together it sort of creates a lip at the top, see pic below. Am i doing something wrong, thoughts?

double thumbin' it!
 
fe578fdd4e463b6cb18e2f6f026c5f19.jpg


double thumbin' it!
 
I just looked and found the install instructions for the damper wich i kept... I also just scan them in PDF, give me your email adress and i will send you the instructions.
 
from Sydney Australia

Have a look at item no 131610741303 on ebay.
Look at the picture.
It also has a parts list.
You seem to be missing some parts.
Also I noticed your triple clamps have been lowered.
 
falcon_6 said:
Have a look at item no 131610741303 on ebay.
Look at the picture.
It also has a parts list.
You seem to be missing some parts.
Also I noticed your triple clamps have been lowered.
Click to expand...
I'll take a look when I get a sec, but yeah my bike is lowered, what does that have 2 do with it? The forks don't touch it?

double thumbin' it!
 
You must log in or register to reply here.
Back
Top