How to access error codes on 09

[broussos]

So i have an 09 with all the mods,,,have 3000 miles on it...started it the other day and the check engine light comes on and stays on...tried restarting it a few times... still comes back on....so whats the procedure to access the error codes and to clear them if possible?Any help would be greatly appreciated...i have the manual on cd but it doesnt seem to have anything about how to access the codes..

 

[FZ1inTX]

In the manual, it is outlined on 8-40. Diagnostic Mode. Page 8-46 shows what to do for erasing the error codes. You will need to be in d62 with the kill switch in the off/kill position. Switch the kill to "RUN" for 5 seconds then back to kill. Go to D61 to see if any codes exist. Shut the key then start the bike normally. If the error returns, you have something still faulting the bike that will need to be addressed. BUT first, go to d61 and watch the codes flash... one every two seconds. Note them before clearing.