Missyl1713
Wizard
On a throttle body sync, gen 2, which is the outputs that you attach to
The tool, gray connectors or black?
The tool, gray connectors or black?
Help
- Thread starter Missyl1713
- Start date
Missyl1713
Wizard
Or, as you face the bike are the outputs the left or the right
Missyl1713
Wizard
From the back
FZ1riderNY
Moderator
As you know I'd love to help but I'm clueless when it comes to fuel injected bikes. Sorry.:shaking head:
FZ1inTX
Adminstrator
Missy, take a peek at this thread and see if this helps. 
Reconstituted TB Sync Tutorial - FZ1OA Message Board
Reconstituted TB Sync Tutorial - FZ1OA Message Board
Missyl1713
Wizard
I got it! I had to do a lot of research, and figure things out, I snapped some pics, and do a write up later. In actuality it's easy technically, kinda hard physically to get to the screws. wow what a difference it made! In that link you gave me I think he used the mapping hoses, which are the ones tee'd together. The ones to use are the two straight through male connectors, (black) and they are plugged together 1 to 3, 2 to 4. And I was mistaken that those were vacuum fittings, they are solid connectors, just plugged together for convenience I think. Bought a small pack of fittings from the auto parts store, and tied my meter hoses to the hoses coming from the throttle bodies. Anyway, write up to
Come!!!
wow what a difference it made! In that link you gave me I think he used the mapping hoses, which are the ones tee'd together. The ones to use are the two straight through male connectors, (black) and they are plugged together 1 to 3, 2 to 4. And I was mistaken that those were vacuum fittings, they are solid connectors, just plugged together for convenience I think. Bought a small pack of fittings from the auto parts store, and tied my meter hoses to the hoses coming from the throttle bodies. Anyway, write up toCome!!!