fz1 front sprocket problem

[Radomiros]

Today I get rid with oil from last season and fill the engine with new one. After test ride I saw oil leak from (topic). Is it expensive to change this seal, I mean does this repair require engine disassemble, maybe there are other parts deeper which must be also replaced. plz help

 

[fisherman322]

Today I get rid with oil from last season and fill the engine with new one. After test ride I saw oil leak from (topic). Is it expensive to change this seal, I mean does this repair require engine disassemble, maybe there are other parts deeper which must be also replaced. plz help

I would clean it all first,oil from chain can build up around front sprocket and look like a leak,but you may have checked this already?

 

[Radomiros]

Im sure its seal

 

[Jmcculler662]

shouldn't be that bad, looks like you could take the sprocket off, pull off the collar, pull out the old sel, drive the new seal in and reassemble.

Attached a pic, the seal is #33, the collar is #19

 

[Radomiros]

does it mean that because of collar I have to open the hole engine?

 

[Jmcculler662]

no, just remove the front sprocket cover to get to it.

 

[Radomiros]

check this link http://victordrummond.net/image/cac...00-transmission-output-shaft-seal-900x675.png as you can see seal got groove and probably it make all the difference and I will have to one stupid engine