Frame slider but engine misaligned

[niceast]

Hi,

I’m troubleshooting the frame slider hole being misaligned. it seems like the engine is to far forwards and slightly high.


the rear engine mounts are still installed. I will try to loose rear mount bolts and install frame sliders.

but is there anything I’m misisng? is there an engine locator adjustment or something?

https://imgur.com/eUXyF9C

https://imgur.com/f3Ix2ky

 

[niceast]

The forums is real quiet. And also too many sub section.

I solved my own problem
By drilling clearance holes using a tool called Carbide Steel Rotary Burr Die Grinder Bit Shank Carving (I think).

https://imgur.com/p9Lhji2

https://imgur.com/EUFQWji

https://imgur.com/rPVE5yo

https://imgur.com/krbW4ap

 

[Jboat]

Well, I guess hogging out the frame is one way to do it...

The right way would have been to loosen the mount bolts and support the engine then get the holes lined up and re-install and tighten the bolts...

 

[GV27]

egads.....

 

[Rabfz1]

Yep, I've seen it all now

 

[moosecapades]

OMG!!!! You ruined the frame...