jayssell
Member
Is there a EXUP eliminator for Gen 1? I find the Gen 2 everywhere , can I use that ?
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
EXUP eliminator for Gen 1
- Thread starter jayssell
- Start date
ElTigre1
Well-Known Member
Yes, but if you are running stock headers you don't want to do it. Exup serves no purpose on the Gen II, but does so on the Gen 1, It will run poorly without Exup.
jayssell
Member
I have removed the EXUP and motor and just need the wire diagram or a link to the Gen 1 eliminator.
Thanks
Thanks
jayssell
Member
Oh, I have a GYTR Carbon can cut in half.
jayssell
Member
Does anyone have the wire diagram for the EXUP eliminator for a Gen 1 or a source to buy one?
klj7734
Member
Does anyone have the wire diagram for the EXUP eliminator for a Gen 1 or a source to buy one?
There is not one. You must do a bypass. Do some searching on this site or the other. One of them has it. Not sure which one or where but it is somewhere.
jayssell
Member
I found it -" jump the black/red to the white/red".
I removed the complete EXUP assembly , ordered a Ivans Pod kit , cut the GYTR carbon can down by 8" and am stretching the rear subframe by 3 inches to fit my 6'6" frame also having my canvas guy stitch up a new seat.
Does anyone know where to find a 3" swingarm extension?
I removed the complete EXUP assembly , ordered a Ivans Pod kit , cut the GYTR carbon can down by 8" and am stretching the rear subframe by 3 inches to fit my 6'6" frame also having my canvas guy stitch up a new seat.
Does anyone know where to find a 3" swingarm extension?