Gohot229
Wizard
Sometimes you just got'a ask someone else once you'v reached a standstill or mental block. Heres what I'm trying to come up with, and I believe I may not be the only one.... I have to use a cane to walk, there's just no getting around it, it's either that or a couple O'hip replacements...ukkk... So while I dont mind the cane, I do mind going for major cutting and re-build...lol.. I need to find a way to mount some sort of clamps that a cane would clip into that would mount on the bike. I'm looking at mounting it somewhere from the swingarm pivot area, and facing up and rearward up to the rear blinker area. It dosn't matter which side, infact the shifter side is less 'busy' due to the can so there might be more space available.
The other thoughts were along the fork legs, but room and space within the farring seems to preclude using that area, and then too the possability of some catastrophic event if it somehow came loose and entangled in the front wheel or brakes, so thats pretty well out. Also along the plane of the handlebars is no good as lock to lock may foul the turning and controls. So whats left is to run it along the same plane as the rear tailsection. I'm sort of out of ideas, well I'v envisioned a couple, but some sort of clamps are what are needed. The cane itself is about the same diamiter as my 7/8's handlebars, so the clamp would need to accomidate that diamiter of tubing which is pretty much standard cane diamiters.
I'm hoping some of you more inventive sorts might see something that I'm missing. I do believe that there are many more individuals out there in the same boat as I am, and find riding the best freedom around, but when we reach our destination while riding,....... find ourselves naked (cane)wise wishing we had been able to bring them with.
The other thoughts were along the fork legs, but room and space within the farring seems to preclude using that area, and then too the possability of some catastrophic event if it somehow came loose and entangled in the front wheel or brakes, so thats pretty well out. Also along the plane of the handlebars is no good as lock to lock may foul the turning and controls. So whats left is to run it along the same plane as the rear tailsection. I'm sort of out of ideas, well I'v envisioned a couple, but some sort of clamps are what are needed. The cane itself is about the same diamiter as my 7/8's handlebars, so the clamp would need to accomidate that diamiter of tubing which is pretty much standard cane diamiters.
I'm hoping some of you more inventive sorts might see something that I'm missing. I do believe that there are many more individuals out there in the same boat as I am, and find riding the best freedom around, but when we reach our destination while riding,....... find ourselves naked (cane)wise wishing we had been able to bring them with.