Center stand rubber bung

[bikemad61]

Hi guys, can anyone help me source a replacement rubber bung for my centre stand, just put on a two brothers exhaust (beautiful!!) and lost?? the bung from the original, it may have come off very recently, either way I do not want the stand to slam in to my lovely exhaust every time I lift it. I had no luck on ebay (my usual saviour)any help will be appreciated, cheers
Tommy

 

[BroHay]

Ace hardware or some other mom/pop for some sort of rubber bushings and some nut/washer/bolt to make your own?

 

[bikemad61]

Ace hardware or some other mom/pop for some sort of rubber bushings and some nut/washer/bolt to make your own?

Yeah thats the plan if all else fails!

 

[Lonerider59]

I don't know about Ireland, but in the U.S. it can be ordered from your dealer for about $3.00 or less. Part # 371-29114-00-00.

 

[NJFZ1]

I would check with a local auto parts store and see if they have something similar in stock. I've seen rubber stoppers used on car trunk lids that should work. If all else fails head over to your local dealer as Lonerider suggests.

 

[scout]

Now's a good time to get rid of the center stand. Get the front stand, like vortec, standard pin for our bikes, goes under the bottom clamp (in the hole with a rubber thingie, may have to move the horn and replace the brake lines with upgrade single system), and get a rear stand that uses swing arm sliders, or axle sliders.

You'll love it. Takes off like 4/5 pounds, and the bike looks non-geek.