misfire

Hey all I'm having some issues with my Gen 2. Specifically I'm getting no exhaust heat from cylinder 2 (or 3 if you count from the right?). I suspected spark plugs or coils. So far I have replaced the plugs. That didn't change. I then swapped the coil from working cylinder 1 to cylinder 2 again...

Hi guys...new to this forum but desperate for help! I have an 08 plated FZ1000 that has a mysterious misfire/cutting out problem The bike runs fine for about 15 miles then starts to misfire at around 4000 revs and then eventually cuts out all together. I have ran the diagnostic on the bike &...

I had a perfect running gen 11 2006 bike until the throttle cable broke last week. Being a competent technician of many years, I thought nothing more of replacing the cable, obviously no! Since fitting the cables I now have a misfire/ rough running issue between 2000-3000 rpm, bike runs and...

What a strange thing that happened to me today. I went for a short ride to Squamish today, my second of the week. The bike was running well and everything was dandy until I developed a misfire a few km from home. I pulled over and had a look at the bike but couldn't see anything obvious to me so...

My FZ1 is a 2008 reg. this morning it started to idle weirdly and it didn't have power when acceleration till it hit higher revs. sounds like it is dropping at least 1 cylinder. I have recently changed all the spark plugs i check them all and tightened them but same issue. So I don't know if...