Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Thanks Yam, unfortunately I don't have the hardware, so I'll have to improvise. I believe what you're saying is that the holes in the fairings line up with existing bolts on the frame/radiator already, is this correct? If so, would I need longer bolts and bushings to push the fairings out a bit or do they sit flush against the existing mounting points? Also, you mentioned a bracket for the top fairing that you didn't use, how did you attach it without the bracket? Thank you.The picture you display clearly shows the lower engine mount (1 to 2 inch diameter flat washers with bolts mount into a hole on the side of the engine or a near by frame. You can find the two holes in the lower portion, where the two side fairings come together, this basically attach the fairings to each other. The screws through the fairings in front to the frame beside the radiator should be evident. I hope this helps.