Plang23
New Member
Are these all the parts needed along with part numbers to do the conversion kit? I work at a yamaha dealer so that'd be sweet just to order the parts at my cost rather then paying someone to put the kit together
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Are these all the parts needed along with part numbers to do the conversion kit? I work at a yamaha dealer so that'd be sweet just to order the parts at my cost rather then paying someone to put the kit together
Do you have a photo of the headlight harness?
I'm gonna see if I can piece the kit together today for a price against the kit. I'll let you know what I come up with
Hello gents!
Found this topic and found it quite useful, so I think you can help me with my problem:
- I got the Z750 which I build for a cafe/street bike. I bought the FZ1n headlight ('cause I love this bike but couldn't afford it) but there were no brackets in the box so I made some fastening by myself. Unfortunately, in the last moment I noticed that the headlight got no threads in any of the holes. So here's my question: how do you exactly mount this headlight to the fork? Where do you screw the screws? Do I need only left&right bracket from this picture or also this thin frame above the headlight - Motorcycle Headlight Set Head Light Assembly for 2007 2008 Yamaha FZ1N 2006 2009 | eBay ?
I'd be very thankful for every response 'cause my whole build is under big question mark right now. I made the conversion from H7 to H4 and everything that's needed but got problems with so small stupid thing -.-'
Regards,
Paul
The left and right black parts mount with "self tapers" to the headlight. These then attach with 4 set screws to the fabricated wire and plate bracket. This is attached to the undersides of the upper and lower triple clamps with 6mm screws.
Pictures of the parts number included in the kit. I will look and see if I can figure out the parts that were in there.
Bolt, Flange 95817-06016-00 $1.05
View attachment 15610
Screw, Truss 97707-50014-00 $1.05
View attachment 15611
Bolt, Flange 95817-06012-00 $1.05
View attachment 15612
Damper (I was calling grommet) 4XV-83513-00-00 $2.31
View attachment 15613
Screw, Tapping 90164-05001-00 $1.24
View attachment 15614
View attachment 15615
I know this thread has been going on a long time, but has anyone else noticed the Parts Shark that everyone keeps talking about doesn't appear to have this kit anymore? The link provided doesn't work. 404, Page Not Found Is there another page I'm not finding?
Also, I don't see many people talking about using the FZ8 headlight. Seems popular elsewhere, just not on this forum. Is sounds easier, is the reason people aren't doing it just based on looks?
Thanks. Yes, this FZ1 was my bike project done on the Cheap & Quick; everything either cost me nothing or very little and took relatively no time to do. The solo-seat fiberglass project was done over a weekend for less than $50 in materials. I don't even have any plans to paint the black primer I' ve had on here since I built the thing. The bike has been knocked over twice by shitty car parkers and rear-ended (with me on it) recently by an actor on his way to an audition. That full-system Graves exhaust was paid for by the kid's insurance company, replacing the stock headers and a Graves slip-on he damaged in the incident.Nice. Home made tail?
I bought the Made in China one; way less expensive, but it also came slightly bent so I had to pull it straight. All is well with it now, but I'm not familiar with the expensive OEM conversion it sounds like you bought.Anyone here who has done the conversion? Need some info for a custom application.