jskf16
www.fazerclub.gr
FOLLOW the ALL DIRECTIVES of SAFETY ON the DETERGENT of FILTERS of AIR K&N THAT IS ENTERED IN THE BOTTLE.
Spray with cleaning K&N and the two sides of filter air until is irrigated completely the filter.
A. You first apply the detergent in the clean side of filter.
B. You afterwards apply in his dirty side. Leave also the detergent in the two sides of filter air for 10 thinly in order to it softens the filth. Do not leave the detergent to dry out on t o filter!
ATTENTION: THE USE OF ANY OTHER SOLUTION OR METHOD OF CLEANING COULD HARM THE FILTER!
2. RINSE (YOU SEE THE FORM).
The filter with cool water of low pressure. Leave the gravity [xeplynei] the filth from the filter air throwing water in the clean side of filter on the length of aspects. Continue rinsing the filter until [otoy] are removed completely the filth and the detergent above the filter. If the filter is exceptionally dirty it can be essential are repeated steps 1 and 2. If exists filth that remains in the filter, you spray each point separately with the detergent, you leave little to act and you repeat the step .
3.DRY
Afterwards the rinsing, you shake softly the filter in order to it is removed from on his water and you leave the filter to dry out naturally in part cool. Do not advance in the step of fertilization until the filter he is absolutely dry.
ATTENTION: USE ANY OF OTHER METHODS (THAT IS TO SAY COMPRESSED AIR AIR, DRIER STOVES, FIREARMS ARMS OF HEAT) COULD HARM THE FILTER.
4. HOW TO OIL IT
(YOU SEE THE FORM) Apply the special oil of filter air in the dirty side of filter only. This will allow a optical report of complete cover.
A. If you use bottle of compaction's K&N, you will compress the bead of bottle at length of “crown of” each aspect using the lip in the end of bottles of compactions as driver. Use the graduated strip of opinion in the bottle in order to you distribute the suitable sum of oil.
B. If you use the spray cleaning K&N, you spray smoothly the oil at length of “crown of” each aspect. Wait for 20 thinly it is absorbed the oil of internally filter. Inspect the clean side of filter for any regions that are lighter in the color. Spray on these regions in the dirty side of filter again. Continue the process until it exists a smooth red color in entire the surface the clean and dirty side of filter.
5.RE-INSTALLATION
Before it repositions the filter behind in the vehicle, you inspect well for any damage. Follow the all particular directives of installation that accompanied the filter air K&N.
Spray with cleaning K&N and the two sides of filter air until is irrigated completely the filter.
A. You first apply the detergent in the clean side of filter.
B. You afterwards apply in his dirty side. Leave also the detergent in the two sides of filter air for 10 thinly in order to it softens the filth. Do not leave the detergent to dry out on t o filter!
ATTENTION: THE USE OF ANY OTHER SOLUTION OR METHOD OF CLEANING COULD HARM THE FILTER!
2. RINSE (YOU SEE THE FORM).
The filter with cool water of low pressure. Leave the gravity [xeplynei] the filth from the filter air throwing water in the clean side of filter on the length of aspects. Continue rinsing the filter until [otoy] are removed completely the filth and the detergent above the filter. If the filter is exceptionally dirty it can be essential are repeated steps 1 and 2. If exists filth that remains in the filter, you spray each point separately with the detergent, you leave little to act and you repeat the step .
3.DRY
Afterwards the rinsing, you shake softly the filter in order to it is removed from on his water and you leave the filter to dry out naturally in part cool. Do not advance in the step of fertilization until the filter he is absolutely dry.
ATTENTION: USE ANY OF OTHER METHODS (THAT IS TO SAY COMPRESSED AIR AIR, DRIER STOVES, FIREARMS ARMS OF HEAT) COULD HARM THE FILTER.
4. HOW TO OIL IT
(YOU SEE THE FORM) Apply the special oil of filter air in the dirty side of filter only. This will allow a optical report of complete cover.
A. If you use bottle of compaction's K&N, you will compress the bead of bottle at length of “crown of” each aspect using the lip in the end of bottles of compactions as driver. Use the graduated strip of opinion in the bottle in order to you distribute the suitable sum of oil.
B. If you use the spray cleaning K&N, you spray smoothly the oil at length of “crown of” each aspect. Wait for 20 thinly it is absorbed the oil of internally filter. Inspect the clean side of filter for any regions that are lighter in the color. Spray on these regions in the dirty side of filter again. Continue the process until it exists a smooth red color in entire the surface the clean and dirty side of filter.
5.RE-INSTALLATION
Before it repositions the filter behind in the vehicle, you inspect well for any damage. Follow the all particular directives of installation that accompanied the filter air K&N.