running/side lights and indicators/turn signals on one fues ? keeps blowing

[barwell1992]

Hi, iv got a problem with my indicators/side lights they keep blowing the 10 amp fuse, checked the wires and nothing is a miss, no shorts or any thing and all bulbs are ok ?

so looking at the fuse box cover it says the ignition is the 15a then signals are the 10a then tail is 10a but the fues thats blowing is the tail but the tail light still works and the indicators and side lights dont

any one have any ideas ?

 

[loosenut]

If it blows right away, you have a short.

 

[delbert]

do you have a tail tidy ? if so does it have an led n/plate lamp .
If yes to the above disconnect it and see if it alters any thing

 

[barwell1992]

Dosnt blow straight away , removed led plate light, its getting worce so now going in to yamaha this weekend

 

[MrHix]

Hi, iv got a problem with my indicators/side lights they keep blowing the 10 amp fuse, checked the wires and nothing is a miss, no shorts or any thing and all bulbs are ok ?

so looking at the fuse box cover it says the ignition is the 15a then signals are the 10a then tail is 10a but the fues thats blowing is the tail but the tail light still works and the indicators and side lights dont

any one have any ideas ?

Does your horn still work? I had both the signals and horn go out and it was the signal fuse. I have an aftermarket horn which actually caused the problem.

Good luck,

MrHix