Hi FZ1ers!

Jeffdu

New Member
I have a problem with my REV3/FZ1 R/T a Gen2. Power plant. Because the clutch and throttle. We’re hand operated and are both foot operated, the clutch releases all the wary out. It’s very embarising at stoplights ! likewise the throttle is very touchy, It revs high with a simple touch. It is cable driven, I’m. Thinking that if I add a. Bellcrank to it , it. Might slow the response time down a bit!

Any thoughts or comments are surely welcome,,,
 
Welcome to the board!
A simple bell crank should work well to increase the travel distance on the foot operated controls. Once the pedal travel distance is where you want it, I would make sure to put stops on the foot pedals so that you don't have a tendency to press beyond wide open throttle and full clutch disengagement.
 
Back
Top