Dale Walker Holeshot Owners

[Baron760]

Howdy,

Can anyone who owns a Dale Walker Holeshot High Pipe slip on please tell me the length of the bolts & spacers for attaching the passenger foot rest? The PO didn't include these and I thought the $35 from Dale was kinda steep so I'm just going to make some spacers and buy the bolts. Thank you.

Baron760

 

[PapaGeno21]

Howdy,

Can anyone who owns a Dale Walker Holeshot High Pipe slip on please tell me the length of the bolts & spacers for attaching the passenger foot rest? The PO didn't include these and I thought the $35 from Dale was kinda steep so I'm just going to make some spacers and buy the bolts. Thank you.

Baron760

I can check tonight as mine are still in the bag as I never installed the rear foot pegs.

 

[PapaGeno21]

Alright here we go.

Length of spacer - 39.61mm
Width of spacer - 18.89mm
Width of the hole that the bolt goes through - 9.58mm

Length of bolt (Not including the thickness of the head) - 64.75mm
Thread length of bolt is 29.06mm
Non threaded part of bolt - 35.69mm
Width of non threaded part - 7.88mm

The bolt is threaded a little less than half way of it, the rest of it gets a bit fatter and does not have threading on there.

The bolts move around a little bit freely inside of the spacer, so I am going to say with these measurements you can actually make a better fitting spacer if you are doing it yourself anyways.


Hope that helps some.

- Geno