RSassi
Member
Greetings,
I ride a 2009. Full Yoshi, K&N, block-off plates, and I've just had the Bazzaz Z-FI Fuel Controller installed. Upon their recommendation I've backed off the fueling a small percentage to account for the fact that I live at 6000ft elevation and regularly ride over 11 - 12,000 ft over various nearby Rocky Mountain passes.
Since installing the Bazzaz there's a significant stutter or sputter when I open the throttle to get moving at low RPMs, under 3000 RPM the bike almost wants to sputter out, then once I rev it a bit it gets going. Starting out is rough anymore.
Question numero dos, does anyone have a custom map I can download for higher altitude riding?
Thanks.
I ride a 2009. Full Yoshi, K&N, block-off plates, and I've just had the Bazzaz Z-FI Fuel Controller installed. Upon their recommendation I've backed off the fueling a small percentage to account for the fact that I live at 6000ft elevation and regularly ride over 11 - 12,000 ft over various nearby Rocky Mountain passes.
Since installing the Bazzaz there's a significant stutter or sputter when I open the throttle to get moving at low RPMs, under 3000 RPM the bike almost wants to sputter out, then once I rev it a bit it gets going. Starting out is rough anymore.
Question numero dos, does anyone have a custom map I can download for higher altitude riding?
Thanks.