Excellent condition '15 FZ1. Never been down, no dents, dings, or scratches. Just over 3400 miles, no mods except dirty roads seats and Yamaha handle bar conversion kit with 1" SW-Mototech risers. Asking $6000. Or reasonable offers. Located in NY 12302.
Bike is SOLD
Hello all!
Just picked up a 2014 FZ1 with 3100 miles. I'm in Indiana, USA. so the riding season is a few months away.
It came with a Delkevic slip on, Tail clean up kit, and LED turn signals. Other than that it seems stock but how do I know?????
No tool kit or owners manual.
Had a...
Hello FZ1(Gen 1) Riders:
I was wondering if anyone has installed and dialed in the FZ1 6Sigma Jet Kit that I purchased on Amazon recently. I was wondering the optimum setting for a stock bike with just a Yosh can slip on? The instructions provided indicated 2 turns on the idle jet screw and...
So my bike (an 04 fz1) now has about 17.5k miles on it and its not starting as easily as it should. Me and a friend are going to check the valves and do an adjustment if needed. This will be my first time doing this. I did order a Clymer manual and a shim kit but im wondering before i start if...
Has anyone flashed their own ECU using the kit from Flash-tune? I am thinking about buying the kit and doing it myself but would like to talk to someone who has done it. My bike is a 2010 FZ1 and is stock, intake and exhaust and all I want to do is remove the restrictions, fix the speedo error...
I do not want to separate this at this time and would like to sell it as a full kit. These were all pulled off my bike after my accident. There is no damage to the exhaust or other parts other than what's stated below.
- Full Graves exhaust
- BMC race filter
- Yoshimura Fender Elim kit the...
Hello
I intend to upgrade my 03 carburetors with RR mod,
and also to replace gaskets and float needle.
can anyone recommend me for a good reliable kit
for this mission?
Thank you
I’m resurrecting this thread, as I need a tank - I recently dented mine and am weighing my options, repair vs possible replacement.
—————-
I know these things are discontinued, but I'm looking for either the whole kit, or just the front fairing.
My front fairing has a crack in it, and I'm...
Hello, excuse my English. I need advice on where I could buy a mounting kit for fly screen from ebay.I have long can not find anything.It is this model:
New Yamaha Carbon Fibre FZ1 Fazer Flyscreen Fly Screen Front Cowl FZ 1N FZ1N | eBay
Thank you
Can someone point me in the right direction? I'm installing a supercharger on my 2013 FZ1 and the manufacturer of the kit advised that I disconnect the MIAP sensor. Thanks in advance for any help.
Good evening guys/gals. I have been a member on the FZ6 forum for a while. A few moderatorshots can vouch for me.
In a continuing effort to clean out our shop, I found this new, Competition Werkes Fender Eliminator for a 2001-2005 FZ1.
This looks to be a 130.00 FE kit. I would like to sell...
Hey everyone. I have a 2011 FZ1N and it did not come with the tool kit that comes with the bike. The previous owner misplaced it. I have a couple of long country rides coming up and want to be prepared.
I have done some searching on the net but am having no luck. Does anyone know if and where...
Hi all. Just wanted to drop a line to say how much I enjoy this forum. Just bought an 07 with retro kit that needed forks. A little research on this forum and I figured out that I could get a set of forks and brakes off of an 06 R1. A week later and it's on the road. Coming from a Ducati 999...
Hey guys, just had the bike knocked over for the first time, so I was thinkin why not add a little bling. Does anyone know where to get the retro body kit with tank and plastics for the 2nd gen fz1?
Well I guess it's finally time for it. I got home yesterday from work and decided to go ride. When I started the bike I could hear a ticking noise. Without ripping the bike apart I can only guess that it's the valves. My baby has just over 40k on her and I'm pretty sure this has never been done...
All, I have recently placed my 2008 FZ1 for sale in another thread. I've been thinking alot about parting out some accessories so here they are:
Shift Red Lower Fairing - Normal wear on the chin from the front wheel. - $300.00 w/o shipping (Again I'll do my best to make this as cheap as possible)
I found this Dremel kit on ebay
Dremel 4000 Series Rotary Tool Kit 4000-4/50
It's $159... The seller looks quite reliable too...
Has anyone seen a better deal?