Hi guys
Any of you got a twin headlight conversion on your fz1 naked?
I’ve been looking to switch again. I bought the hid projector headlamp last year. It looks like the oem but has the projector lamp in it.
So now I’m looking for a more radical look like the Oberon Performance CNC Billet Twin...
Does anyone know the size that fits the fz1 ?
I found this info on eBay will it fit?
C-SPANNER
YAMAHA STEERING STEM
ADJUSTMENT TOOL 43mm
SQUARE ½" DRIVE
REPLACES TOOL NUMBER 90890-01403
Will it fit the gen2 fz1 guys?
Thanks in advance
Delta.
Hi guys just a quick one.
I’m wondering if any of you have had this noise..
So the bike runs ok through the gears, up and down etc.
When I’m stationary and pull in the clutch and put it into 1st gear it’s fine. When I start to let the clutch out as the load goes on and the bike starts to...
Hi guys I have a problem. Gen2 2007 bike.
Was out yesterday and the bike was fine. It started and run ok on two start/stop trips up/down the motorway. I parked up in a service station the last time and after being left for an hour it wouldn’t re-start..
Key in ignition alarm turned off ready...
This new member robert111 sent me a personal message. Bit dodgy if ya ask me here’s the message and thoughts please guys
I am Mr.Robert Dogbey a banker by profession, worked with First Gulf Bank in Abu Dhabi for 17 years.( United Arab Emirates ) now currently holding the post of director...
Hi guys
I need some advice on the clutch cable. I have a fz-1 N 2006- on model. I have changed the risers and the metal bend in the cable near the clutch lever gets in the way.
Do any of you know of another clutch cable from another bike that fits and does not have that metal bend on it...
Hi guys
I've decided to buy some new front fork springs for my gen 2 fz1. 9.5kg to take my weight over the oem.
Is there any videos on changing the springs?
Is there any special tools needed like a spring compressor or can you do it without one?
Any do's or dont's ?
Any downloads or videos...
Just a quick one
Ape manual cam chain tensioner on the packet it says R1 04-06 and Fz1 07-12
Will this also fit the 06 gen2 ?
Mine is registered in 07 but it is the 06 engine.
Are the cam tensioners the same?
Thank guys
Delta.
Hi guys
So I have a 2006 fz1n 18,000 miles and it's making a ticking or clicking noise etc on cold start up. After 30 seconds or less the noise goes. I'm thinking it's not holding oil pressure in the tensioner and until it's run for 10-30 seconds I'm getting the noise.
My questions are..
Do I...
Hello guys
So I've done almost everything to my ride other than change the fork oil.
What I am wanting to know is...
For a FZ1-n 2006-
1. What weight oil is best to use ? 5 or 7.5
2. How much oil in each leg? 500+ml ?
3. The air gap? 140mm I think I read somewhere
4.is there any fork...
Hi guys has anyone fitted the hid projector complete headlight?
The one with the angel eye and demon eye. It comes as a complete unit. Plug and play.
Here's the eBay number 332066609933. From KT.
Just wondering if anyone has bought and fitted one and what they thought of it. I've been...
Hi fellers.
Just a quick one. My FZ1 gen 2 is meant to have a 18ltr fuel tank yes?
Well each time I fill up I only manage to get around 14 ltrs in. This is from the last bar flashing on the clocks and I also open the filler cap and shake to hear what's left in the tank. I only fill on the...
Hello guys and yes it's been a while since I last posted.
My question is, have any of you tried the new T30 Evo?
I've had plenty of fun on the T30's and yet again it's time for new rubber. I'm told the T30 is no longer available and the Evo is the new generation..
I'm getting the T30 Evo...
I have a 2006/7 fz1n
What other rims will fit from fz1's etc guys?
I want to buy some 2nd hand rims so I can get them painted up nice. As I ride the bike every day to and from work I can't be without it for more than a day or so..
Thanks in advance for any info.
Delta.
Hi fellers,
Just wondering how you clean your SS downpipes.
I have Arrow downpipes and there looking brown and stained, not seriously bad but not looking nice.
Now I used to use solvol autosol on things like this but I'm wondering if there's any fast fixes out there. Any sprays?
I could...
Ok so I've bought some nice cnc blue anodised foot pegs to bling the bike a bit. The rear pegs wasn't any trouble as you pull the cotter pin from the shaft that goes through the peg and swap the new pegs, easy!
Right the front, there's no cotter pin that goes through the shaft. It looks...
Ok so I've done it. Ordered a set of stainless Arrow race headers (collectors)
Just got to wait for delivery now. I'm hoping they will be a nice match for my Micron serpent titanium end can.
I'm wondering if the sound will alter much also..
Hi fellers, have any of you guys tried any of the cheap rotors from ebay via China ?
I've been looking at them all from silly price to how can they be that cheap..
It looks like a lot of even to branded ones come from China. I see some from M factory stating quality stainless steel rotors and...