Search results

hello porsche! all bikes yamaha suffer the fuelcut, defect very annoying and dangerous, with this device from deleting it almost totally. if you have a good crafts' I can build you, or you'll get help from good friends. Delbert seems to have improved with his bike, ask him, because I speak very...

Delbert hello! seems you are quite satisfied me device! if you lean mixture at low test to set the CO to 20 for all cylinders, something better, you can always put everything back as before. I do not think that my device moves the problem in other ranges, 'cause fuelcut occurs only in that...

have you a correct contact with wires? i dont' see the picture of diodes , wrong link? i hope you like drive your bike now. if you have a sure contact with wires must go well. wei a little on off will remain but the 80% go away. aspect of your driving impressions after a bit 'of miles, negative...

hi delbert this the correct connector were operate

nobody wants to try my device? I guarantee that it works great and is very cheap:cool:

o2 disconnect is a bad thing for the ecu, you have a big unuseful consumption;)

you can try my device, is simple and work fine, is very cheap and you can back when you wont

you know all the european forums

azz you know all the forums!!!!!:D by by from brescia italy

marty hello !! for the rental bikes can I find out and let you know. here in brescia there are beautiful places to reach by bike Lake Garda Lake hydro and Lake Iseo, all within 40 km, if you really come to Brescia you should visit them all three, in a day and you can see them very well. I write...

ivan good morning! my device works, and I have not copied anything from anyone this is clear, I am a person correct. and 'true that it only works the first laps of the engine, but' at that point you need me, just to avoid acts fuelcut. as you may have seen from my post and 'very simple, but to...

Delbert hello! I posted my device available to all users without marketing it 'cause I also received suggestions and help in the forums I frequent, it seems right and proper way'. you help others and others will help you. have you find the right connectors? can you post the ilnk for me please...

hello a7x3797!! i have answerd to roggiedog at pst n°38 i use the fall of voltage fall diodi (0.6 volts x 4 = 2,4 for send 1.85 volts to ecu thanks for you answer. excuse my little english;)

the diode is very very cheap, only some cents!!

ok delbert ! you will be happy to drive after mounting believe me!!!:noworries: Delbert after mounting the device, post your impressions of driving I recommend, I would be happy, and if placed photos of work done help others who want to do it. soon then thanks

hi delbert! the flow of voltage starts from the positive (blue) passes in the diodes, and arrives to pink-white. practically always sends a voltage of about 1.85 volts to the ECU to avoid turning off of the injectors. you can see in photo if you dont' solder the wires must build a extension...

hello roggiedog !! I try to explain it with google translator working my little device. the yamaha (all) have the small defect that we in Europe call on off (fuel cut). as you know happens when you close the throttle and then reopen. shutting off the gas injectors, and reopen when employing a...

ciao a tutti da brescia!!! anche io entro in fazeritalia stesso nik