Search results

Would be afraid the foot peg bracket wouldn't take it if the bike went down hard. But there probably wouldn't be that much weight on it back there.

added another pic of just the bars............. Found them here for 140.79 + shipping................. Only thing is that it doesn't take the screw in bar ends like the original, they have a small bolt that goes through the center into the bar. So i have a set of black graves bar ends if...

Over the weekend i installed the yamaha handlebar conversion, d3 grips, black and red levers, and a black gytr sprocket.

Believe i might buy those......... pm sent and voice mail left.......

i like my national cycle v steam, they make one for gen 1. Looks better than most.

State Farm beat progressive for me.

Have heard that the yamaha seat is more comfortable. The Corbin is just a harder foam, but the yamaha has a gel pad in it.

You have to cut wires and wire them in, guess you could order the stock plug for the signals and make them plug and play pretty easy. They also have their own flash rate controller so you don't have to worry about flash rate. But one complaint i have it they can't sync to my flash rate, they use...

Just remember that when you pull up the tank the kink may straiten out, look all over it for signs and let it down slowly and watch how the fuel line lays down. Probably wouldn't hurt to disconnect the line and reconnect it while you are under there. When you disconnect it it shuts the fuel off...

I would check the fuel line. Seems to me that it's running out of fuel and check the tank for trash, being a new tank if it had any in it it could have stopped up a filter. Would rule out the quality of fuel, i run premium in mine, plus if it was it should be sputtering through out the revs, not...

PM Sent.................................

I don't think they would give you much rise if any. Everything i find on them is that they just change the style of bar. Leaves me thinking that they put the grips in the same spot, just a curved bar instead of the strait drag bar. I like the style and am in the market for something more...

Think they program the things to start running slow so you have to buy a new one

yeah, pull out the plastic clip and i believe there are two buttons on each side, squeeze them and pull down.

My fz1 is that first street bike i've ever owned. Went looking for a 500 or 600 but fell in love with the fz when i saw it. The first week i just rode it around the yard and up and down my 1/4 mile long driveway getting used to the throttle and clutch. If i could learn on it in gravel and grass...

Just need to get you some red strobes to mount on the bike.

here is one on ebay.......... Also sells on power commander's website for $12. But yes, you can just turn on your key and plug your laptop into it, how i do mine. Would send you mine but i needed the part that snaps onto a battery so all i have is the end that plugs into the pcIII. Dynojet...

I have to use the jack because i usually don't have a 2nd person to help.

I don't see a problem with it, wouldn't leave it that way for long. I have put a floor jack under mine with a board and a towel between the pipes and the board to jack up the front end. When it's on the center stand there isn't really that much weight on the jack.

Exactly where mine is, in a black garbage bag under the bed, right next to the rc car i don't ever use.