Recent content by super googan

Rossi is looking pretty darn fast this year ! He's had a bit of bad luck but his pace seems a bit better overall this year. I had a feeling he would do better than most with the New less intrusive ECU.

Only thing I can offer is try low rpm while drilling and keep lubricating the bit. High speed and no lube will just kill the bit faster. Take your time.

Check out the coils while you're doing the plugs. Quite a few FZ1 owners have had coil issues. Any moisture around the coils from that rain would aggravate a coil issue. Many of the failed coils are from bad insulators allowing spark leak. Just be aware many coils test within spec on a meter...

Add me to the list of members with a failed coil. Bike has had an intermittent stumble or hiccup at low rpm for a longgggg time. Never could trace the problem. When the issue was minor the temp difference between all 4 cylinders was only 20F. Last week she started sounding like a triple at...

Just had the very same issue, erratic idle and a hiccup or even bucking between idle and 2000 rpm. Found the bad cylinder with one of those laser temp reading guns. Bad cylinder was 30F cooler than the others. Replaced the coil and plug for that cylinder and all is well now. I actually think...

If the lever seems to move more than or as much as it did with the stock lines, then you still have air in the system. Well bleed braided lines should feel noticeably firmer than stock rubber lines. Probably still a bit of air in the system. I'd pump it up, hold pressure and crack each...

I see 2 on ebay one in Canada Yamaha FZ1 FZ 1 2008 08 Engine Motor Assembly Running Strong Video | eBay

I've owned quite a few sportbikes and I can't say any of them had decent mirrors. I even bought spacers to move the mirrors out on the FZ1 but they are still not perfect. Being able to see whats behind and next to you at all times WITHOUT taking your eyes off of whats in front of you is...

Considering top line helmet prices from Shoei and Aria are already well over $600 the price seems reasonable. Heads up display with the GPS and especially rear view cam could be a life saver. I REALLY like the thought of a wide view rear camera with heads up display. Of course if its heavy...

HAHAHAHA ! I'll kick your ass for 5 bucks less than Billy !

Did you guys get the AFR reading or just a power run ? I Still wonder if running Ivans map ( made for the Yosh ) Hurts the Arrows performance on the dyno .

Great comparison, THANK YOU !!

Keep in mind Ivans map was designed for the Yosh header not the Arrow. That may effect the results as much as the design of the different headers does. I'd like to see the AFR ratio and see how close that is between the two bikes along with HP and torque.

This is not the first time I've heard someone mention a problem with the K&N fitting correctly. Try the search feature at the top of the page for more info. I THINK I remember someone saying to not use the metal spacer that comes with it... but I'm not sure.

Bump the idle back to 1300-1350rpm that should help. EDIT : I see in your vids you already did that.