picard
Well-Known Member
I was wondering whether my EXUP valve actually works. Is it supposed to cycle when you switch the key to on?
In the manual it says "perform the self-diagnostic mode" and "make sure the EXUP operates several times..."
The cables are all tight and everything looks in spec (less than 3 mm play)
Mine does not move when I turn the key on nor does it seem to move as I go through the revs (in neutral). It does seem to be in the open position all the time (resting on the tabs).
I do not get any error codes and the valve moves easily by hand.
Any advice would be appreciated.
In the manual it says "perform the self-diagnostic mode" and "make sure the EXUP operates several times..."
The cables are all tight and everything looks in spec (less than 3 mm play)
Mine does not move when I turn the key on nor does it seem to move as I go through the revs (in neutral). It does seem to be in the open position all the time (resting on the tabs).
I do not get any error codes and the valve moves easily by hand.
Any advice would be appreciated.