1st let me say big thanks to everone for helping me this isue, i finally got it running againg, i found the sensor, and all i had to do is have it seating up right, and it re-sets its self, on the sensor there are indication of how it should be mounted.
now im moving to 2nd project which is...
it shows code 30 which is the lean angle sensor, since im not sure which one it is actually, i looked at all of the sensor and just moved them aroung and checked connections and stuff. so i went back turn the key on the code was gone, so i cranked it, it started ran for about a sec and cuts off...
yes the N light comes on when in Nutral, i just did a check and found 2 blown out fues but were all head light and turn signal fueses, i also check for any switches around, under seat, and under the gass thank, no switches everything looks good, any i dea how to check if the fuel pump is good or...
i did the bypass and it ran but only if im holding the starter switch down, soon as i let go it cuts off, this was when i manualy put fuel in all cylinders
WELL I THE STAND CAME OFF IN THE CRASH, BUT I GOT IT AND PUT IT BACK AND CONNECTED THE WIRES, I MANUALLY PUT FUEL INTO THE CYLINDERS AND IT STARTED AND RAN AS LONG AS MY HAND WAY ON THE IGNITION SWITCH IT RAN BUT SOON AS I LET GO OF THE GINITION IT CUTS OFF, A LOT OF WHHITE SMOKE CAME OFF THE...
:confused0024: i need some help getting my baby back in riding shape. i droped in on the left side going about 25mph now it will not start, enegine warning light is on. it cranks and turns over but will not run. i droped some fuel in the the cylinders and it started but died, what could it be...
hello everyone new boots here lol
Any way i just wanted to say hello and thanks for accepting me to the club. i owen a 2008 FZ1 which is now in parts lol.
im from Los Angeles USA but im now in NC for work crazy.
i need some help getting my baby back in riding shape. i droped in on the...